| Gas Switching Block |
 |
| |
 |
| |
 |
| |
 |
| |
 |
OmniSwivel International
Part Number:
GSB-R (right hand mounting)as shown
GSB-L (left hand mounting)
Description:
Right Hand Gas Switch Block.
2ea 9/16"-18(adapters) Male Inlets.
1ea 3/8"-24 Female outlet.
GSB-R (right hand mounting)as shown
GSB-L (left hand mounting)
Description:
Right Hand Gas Switch Block.
2ea 9/16"-18(adapters) Male Inlets.
1ea 3/8"-24 Female outlet.
- Solid brass construction for maximum
durability. - Oxygen Compatible Materials and O-
Rings. - Inlet adapters can be removed to
expose 3/8"-24 female ports. Allowing
for flexibility of hose attachments. - Quick Disconnects attach directly to
the inlet port alleviating the need for
more adapters.
The OmniSwivel Gas Switch Block allows a diver to change between two separate air tanks
without having to remove their full face mask. The knob turns a full 180 degrees ensuring that
there is no accidental switching during the dive. The knob pointing to the first position(as shown
in top photo) signifies that the air source closest to the outlet is in use.
The center photo shows the GSB in the shut-off position. In case of a second stage failure, a
diver can turn the flow off to mask and switch to an alternative regulator. This shut-off position
also prevents a cross blending of gases during a switch over.
The bottom photo shows the GSB using the secondary air source.
without having to remove their full face mask. The knob turns a full 180 degrees ensuring that
there is no accidental switching during the dive. The knob pointing to the first position(as shown
in top photo) signifies that the air source closest to the outlet is in use.
The center photo shows the GSB in the shut-off position. In case of a second stage failure, a
diver can turn the flow off to mask and switch to an alternative regulator. This shut-off position
also prevents a cross blending of gases during a switch over.
The bottom photo shows the GSB using the secondary air source.
