Quick Disconnect Female: Streamline

Quick Disconnect Female: Streamline




Female QD:

  • 3/8"-24 Male (Connects to a standard 1st Stage low pressure port)


  • Female QD has lock built into sleeve.  Once connected, rotate the sleeve counter-clockwise 90deg to engage the lock.
  • Solid Brass Construction
  • Made with 02 compatible material


Add To Cart

Country of Origin: 

United States of America 

General Maintenance:

Rinse all products off with clean water at the end of the diving day.  Allow the product to drip dry or towel off.  Do not allow the adapter to sit in dirty water for a prolonged period.  Doing so may discolor the plating.  Discoloration will not have a negative effect on the product other than appearance.

O-ring Service:

O-Rings should be replaced every 100 dives or 1 years, whichever comes first.  Please refer to the proper o-ring replacement guide or Standard Operating Procedure (SOP).  Use only o-rings approved by OmniSwivel International.  

** Always positive pressure test fittings prior to entering the water to ensure that an air tight seal has been made. **

General Installation Procedures:

Female Quick Disconnect:

  • Thread the Female QD to a 3/8"-24 threaded port using hand tight pressure. 
  • Use 3/4" Hex wrench on the Female Quick Disconnect to secure the fitting by applying hand tight pressure to ensure a snug fit